DS-PDD12P-EG2-WB

Hikvision DS-PDD12P-EG2-WB combines passive infrared and microwave sensing in a wireless motion-detector reference. Its listed detection distance is 12 m with 85.9° coverage and 52 sensing zones. The 24 GHz sensing band is separate from 433 MHz communications. Confirm pet settings, mounting, panel compatibility and actual WB supply before an enquiry.

Hikvision · Full reference: DS-PDD12P-EG2-WB

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Motion sensing and indications

Detection methods
Passive infrared and microwave sensing are listed together. This is not a claim of human identity recognition.
Detection distance reference
12 m is the manufacturer detection-distance reference. Confirm mounting, sensitivity and the actual site; not a universal room radius or no-blind-spot guarantee.
Detection angle
85.9° is the listed detection angle. It is distinct from radio propagation or a camera field of view.
Detection zones
52 detection zones are listed. These are sensing zones, not 52 alarm-panel inputs or partitions.
Detectable movement speed
0.3–2 m/s is listed. Treat this as a manufacturer test reference, not detection of every target under all conditions.
Sensitivity modes
Auto, High and Pet sensitivity modes are listed. Confirm the configured mode.
Pet-rating reference
The sheet lists a 30 kg pet-immunity reference. It requires suitable settings, mounting and animal behaviour; it is not immunity to all animals or positions.
White-light filter reference
6,500 lux is the stated white-light filtering value. This is not illumination output or a blanket sunlight-immunity guarantee.
Microwave sensing band
24 GHz nominal, with a listed 24.15–24.25 GHz interval, is the microwave sensing band. It is not the wireless communication carrier or cellular 5G.
Temperature compensation
Digital temperature compensation is listed. No ambient-temperature accuracy or immunity to every heat source is inferred.
Near-detector coverage feature
Creep-zone protection is listed. Coverage still requires correct placement and testing.
Processing and optics
Digital processing and sealed optics are listed. Sealed optics do not by themselves establish a weatherproof housing rating.
Tamper monitoring
Front and rear tamper protection is listed.
Status indicators
Ambient-temperature and signal-strength indications are listed. LEDs are green for PIR, red for microwave and blue for alarm.

Radio communication references

Radio technology
Tri-X two-way RF communication is listed. This is not Ethernet or a Wi-Fi specification.
Communication carrier
433 MHz is the listed WB communication frequency, separate from the 24 GHz microwave sensor.
Transmission security reference
AES-128 encryption is named by the manufacturer. This is not an independent security audit or a guarantee against every attack.
Radio distance reference
1.2 km in free space is listed. It is not guaranteed indoor coverage or the motion-detection distance.
Frequency hopping
Frequency hopping is listed; actual interference resilience must be assessed on site.
Enrolment methods
Power-up, remote ID and QR-code enrolment are listed. Confirm the panel, app and regional configuration.

Power, environment and selection

Battery reference
Two CR123A cells are listed. Confirm actual supply and replacement instructions; cell count does not establish a 6 V device rail.
Typical voltage
3 V is the stated typical voltage. It is not a battery-capacity or runtime measurement.
Operating temperature
−10 to 55 °C is the listed operating range. Confirm the actual environment.
Storage temperature
−20 to 60 °C is the listed storage range, not the operating range.
Operating humidity
10–90% relative humidity is listed. No condensation or outdoor rating is inferred.
Weight reference
141 g is listed. Battery and packaging inclusion are not specified by this weight row.
Mounting reference
Indoor wall mounting at 1.8–2.4 m is listed. Confirm the coverage and actual installation position.
Optional bracket category
Wall and ceiling accessories are listed as optional, not included by default. Confirm the exact bracket identity, fit and applicable mounting compliance.

Selection notes

  • Manufacturer reference for DS-PDD12P-EG2-WB only. Confirm the supplied hardware, firmware, region, panel and installation conditions; WB, WE, (B) and wired versions are not interchangeable.
  • ISD supplies products only. Manufacturer examples do not confirm ISD stock, price, ETA, actual supplied contents, local warranty, authorisation or approval. Qualified personnel must confirm the intended system and site.
  • Follow the official battery, safety and installation instructions; keep new and used batteries away from children. No installation, monitoring service or actual device enrolment is included.

Official documents

Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.

Continue browsing