IS DistributionsEnquireDS-K1T804BMF
An optical-fingerprint and M1-card terminal combining access-control and attendance functions. The exact source lists a 2.4-inch 320 × 240 LCD-TFT display, 3,000 cards and fingerprints, 100,000 events, wired networking and Wi-Fi.
Hikvision · Full reference: DS-K1T804BMF
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Identity & authentication
- Device class
- Pro Series Fingerprint Terminal
- Operating system
- Linux
- Display
- 2.4-inch LCD-TFT screen
- Display resolution
- 320 × 240 pixels
- Card reference
- M1 card
- Card-read distance
- 0-4.5 cm manufacturer reference; credential and conditions affect operation
- Card-time reference
- <1 s manufacturer reference; actual response depends on conditions
- Fingerprint module
- Optical fingerprint module
- Fingerprint comparison
- 1:1 and 1:N modes listed; configure the intended mode
- Fingerprint-time reference
- <1 s manufacturer reference; actual response depends on conditions
Capacity & network
- Card capacity
- 3,000 cards
- Fingerprint capacity
- 3,000 fingerprints
- Event capacity
- 100,000 events
- Wired network
- TCP/IP, 10/100 Mbps self-adaptive
- Wi-Fi reference
- Wi-Fi support explicitly listed; band, standard and actual network configuration need confirmation
- Integration reference
- ISUP 5.0 and ISAPI listed in the overview; confirm supported firmware, platform and configuration
- Access and attendance
- Integrated access-control and attendance management listed; confirm the supported workflow
Interfaces
- Audio output
- One loudspeaker and one buzzer
- Network interface
- One network interface
- Wiegand interface
- One Wiegand interface; direction, bit format and wiring are not established here
- Lock interface
- One lock-output interface listed; no numeric output or relay-contact load rating established here
- Exit-button interface
- One interface; wiring requirements need confirmation
- Door-contact input
- One input; confirm sensor and wiring compatibility
- IO input
- One IO input; electrical ratings require separate confirmation
- IO output
- One IO output; electrical ratings require separate confirmation
- Tamper reference
- One tamper interface/reference listed; confirm configuration
- USB interface
- One USB interface; supported functions require confirmation
Power & physical reference
- Indicator
- Power/status indication, red/green
- Terminal DC input
- 12 V DC, 1 A terminal input; not a lock-output rating
- Operating temperature
- -10 to +55 °C manufacturer reference; match actual operating conditions
- Operating humidity
- 10-90%, non-condensing
- Front-face height
- 205 mm, consistent between table and front drawing; confirm the overall mounting envelope
- Front-face width
- 76.5 mm, consistent between table and front drawing; confirm the overall mounting envelope
- Mounting
- Surface mounting listed; parts and site fit need confirmation
- Language reference
- English is among the listed languages; exact supplied firmware/language set needs confirmation
Selection notes
- Match the supplied hardware, firmware and connected equipment to the cited exact-model document.
- Input supply ratings and interface quantities are not lock-output or relay-contact load ratings. Confirm electrical compatibility separately.
- ISD supplies products only. Price, stock, delivery, local warranty and the actual supplied configuration require separate confirmation.
- Confirm total depth and wall clearance before choosing mounting parts; the cited table and side drawing are not consistent.
- Biometric benchmark error rates are not field-performance or security guarantees.
Official documents
Manufacturer source checked 2026-10-15. The supplied unit and local terms require confirmation.