Home / Products / Hikvision

DS-K2604T

DS-K2604T is listed as a four-door access controller. Its enclosure and main-board references have different inputs and dimensions; confirm the supplied form factor, readers and lock requirements before choosing quantities.

Hikvision · Full reference: DS-K2604T

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Door and reader interfaces

Device class: Four-Door Access Controller
Door control reference: 4 doors in this DS-K2604T reference; readers, locks and accessories need separate confirmation.
Reader interface counts: 8 RS-485 reader references and 4 Wiegand reader references; not a guarantee of 12 simultaneous readers.
Door contact inputs: 4
Exit-button inputs: 4
Alarm inputs: 4
Case inputs: 8 case inputs as printed; confirm exact I/O function and wiring.
Tamper input reference: 1 tamper alarm input
Fire-alarm input reference: 1 fire-alarm input; this alone is not a compliant emergency-release design.
Lock relay outputs: 4 lock relay outputs; count is not a contact/load rating or lock-power supply.
Alarm relay outputs: 4

Capacity and access functions

Processor: 32-bit processor
Card capacity: Up to 100,000 cards, including 97,000 non-visitor cards and 3,000 visitor cards.
Event capacity: Up to 300,000 card-presenting event records.
Card-number length: Maximum length 20 in the card-number reference; confirm the exact card format.
Communication references: TCP/IP, RS-485 and Wiegand W26/W34; features also name EHome5.0, ISAPI and OSDP. Verify exact reader/protocol/firmware support.
Offline reference: Offline event storage and insufficient-storage warnings are listed; data is retained when powered off.
Access-control functions: Multi-door interlock, anti-passback, multiple authentications, first-card opening, super-card and super-password functions are listed.
Cross-controller anti-passback: Card-based operation requires RS-485 reader wiring. Network-based operation requires working server/device communication; the selected server reference stores up to 5,000 users’ records.
Alarm-function references: Reader tamper, unsecured/forced/timeout door, duress, blocklist and repeated illegal-card alarms are listed; verify sensors and I/O configuration.
Linkage reference: I/O and event linkage
Password-group reference: 500 password groups in card-or-password authentication mode.
Clock and time-zone reference: Built-in clock, automatic/manual synchronization and time-zone settings are listed.

Power and physical profiles

Enclosure AC input reference: 100–240 V AC in the enclosure reference, not the bare-board input.
Main-board DC input reference: 12 V DC for the main-board profile, not an AC input.
Loaded consumption reference: Up to 100 W with load in the DS-K2604T reference; not a relay contact rating.
Unloaded consumption reference: Up to 4 W without load; not loaded consumption.
Main-board dimensions reference: 236 × 185 × 37 mm, main-board only; do not use as the enclosure footprint.
Working temperature: −20–65 °C in the reference configuration.
Working humidity: 10–90%, non-condensing

Selection notes

DS-K2604T four-door model only; this Algeria regional enclosure reference is not a Malaysia supply or package confirmation.
Common family entries apply only to DS-K2601T, DS-K2602T and DS-K2604T in this Algeria regional enclosure reference; confirm the supplied profile.
Main-board profile only; confirm the supplied form factor before wiring or ordering.
Reader counts are per stated interface reference, not guaranteed concurrent operation. Check reader protocol, power, topology, firmware and relay load.
Enclosure AC input and main-board DC input describe different physical profiles, not interchangeable wiring instructions.
No local kit, battery, enclosure, locks, readers, stock, price, delivery or warranty is confirmed.

Official documents

Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.