IS DistributionsEnquireDS-K2M0016A
A distributed elevator-controller reference using RS-485 with a master controller. The cited document lists 16 relay outputs, eight DIP switches, a 32-bit processor and guide-rail mounting. Its DS-K2210 linkage must be checked against the exact system and authorised lift integration.
Hikvision · Full reference: DS-K2M0016A
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Controller identity & linkage
- Device class
- Distributed Elevator Controller
- DIP switches
- Eight DIP switches for address and relay-type settings; configure for the exact master system
- Relay outputs
- 16 relay-output terminals; channel count is not a contact voltage/current rating or installation approval
- Relay modes
- Button Relay, Call Elevator Relay and Auto Button Relay listed; system setup and lift interfaces require confirmation
- Master linkage
- The document names DS-K2210 and up to eight distributed controllers per master; verify supported firmware, configuration and lift interface
- Communication reference
- RS-485 communication with the master controller listed; bus wiring and addressing need verification
- Event linkage
- Master-controller event-reporting linkage listed; supported system and configuration required
Interfaces & power
- Processor
- 32-bit processor
- RS-485 interfaces
- Two RS-485 interfaces
- Alarm inputs
- Two alarm inputs; input electrical ratings require confirmation
- Buzzer
- One buzzer
- Tamper reference
- One tamper-proof reference listed; actual detection and configuration need confirmation
- DC input
- 12 V DC ±15%; input current and relay-contact load ratings are not established here
Physical & environment
- Operating temperature
- -40 to 158 °F, in the source's printed unit; confirm actual operating conditions
- Operating humidity
- 0-90%, non-condensing
- Dimensions
- 167 (L) × 105 (W) × 30 (H) mm, in the source's labelled order; confirm mounting clearance
- Mounting
- Guide-rail installation listed; matched rail and installation fit need confirmation
Selection notes
- Match the supplied hardware, firmware and connected equipment to the cited exact-model document.
- Input supply ratings and interface quantities are not lock-output or relay-contact load ratings. Confirm electrical compatibility separately.
- ISD supplies products only. Price, stock, delivery, local warranty and the actual supplied configuration require separate confirmation.
- A controller/relay count is not an approved lift design, total floor-capacity guarantee or safe wiring plan. Lift-system checks belong to the authorised system integrator.
Official documents
Manufacturer source checked 2026-10-15. The supplied unit and local terms require confirmation.