Home / Products / Hikvision

DS-1LN5E-E/E

The Hikvision DS-1LN5E-E/E reference describes a Cat5e U/UTP four-pair 25AWG PVC network cable, not a network switch. Review conductor and sheath construction for your cabling requirement, retain the complete model, and tell ISD whether you need metres or boxes when choosing enquiry quantity.

Hikvision · Full reference: DS-1LN5E-E/E

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Cable reference

Device class: U/UTP CAT5E 4P 25AWG PVC Cable
Cable construction: Cat5e, U/UTP four-pair 25AWG PVC cable as described in the manufacturer reference. Confirm the intended structured-cabling and termination requirements; this is cable, not a network switch or patch lead.

Construction and materials

Conductor material: Solid-Bare Copper, 99.95%, as listed. No copper-clad-aluminium substitution is established by these documents.
Conductor diameter: 0.450 ±0.005 mm as listed for conductor diameter. This is not the overall cable diameter.
Insulation material: HDPE as listed for the insulation material. Confirm insulation dimensions and connector fit for the supplied cable.
Sheath material: PVC as listed for the sheath. Confirm the applicable installation/fire requirements; this material name alone is not an outdoor, LSZH or local fire-approval claim.
Sheath outer diameter: 4.7 ±0.4 mm as listed for outer sheath diameter. Confirm connector and pathway fit for the actual cable.
Rip-cord reference: Rip-cord: Yes, as listed. Confirm the supplied construction before termination.
Separator reference: Separator: No, as listed in this specification. This is separate from the drain-wire entry in the technical data sheet.
Drain-wire reference: Drain wire: No, as listed in the technical data sheet. This is not a claim about another shielding or category variant.
Pair-colour reference: White-Blue/Blue; White-Orange/Orange; White-Green/Green; White-Brown/Brown as labelled for the four pairs. These colours are not a connector pinout or permission to infer a termination scheme.

Electrical test references

Impedance reference: At 1.0 to 100.0 MHz: 100 ±15 Ω, under the Electrical Characteristics (20 °C) heading. Confirm the actual link design and test requirements.
Delay-skew reference: At 1.0 to 100.0 MHz: ≤45 ns/100 m, under the Electrical Characteristics (20 °C) heading. This is a test reference, not a guaranteed installed link length.
Resistance-unbalance reference: DC conductor resistance unbalance: ≤5.0%, under Electrical Characteristics (20 °C). Resistance unbalance is different from absolute conductor resistance.

Environment reference

Ambient temperature: -20 °C to 70 °C as labelled for ambient temperature. Confirm the exact installation conditions; test-temperature claims are not continuous full-performance guarantees.

Selection notes

This reference concerns DS-1LN5E-E/E only. Confirm the exact supplied version, intended system, installation conditions and package with ISD; no shortened model or adjacent suffix is interchangeable.
ISD supplies products only. Confirm supply, stock, price, ETA, package contents and local warranty separately. Choosing quantity for an enquiry does not create an order, payment or stock reservation.
Specify whether the required quantity is in metres or boxes in your enquiry. Pack length, unit of sale and delivered quantity need ISD confirmation; no pack option or installed link distance is assumed.
Confirm connector/termination fit, installation environment, required test standard and the supplied cable version. Manufacturer test references do not certify an installed link; confirm suitability before use.

Official documents

Manufacturer source checked 2026-10-18. The supplied unit and local terms require confirmation.