Home / Products / Hikvision

DS-3E1310P-EI/M

The Hikvision DS-3E1310P-EI/M is an eight-port Fast Ethernet smart PoE switch reference with two separate Gigabit RJ45 connections. Review the shared PoE budget, port-isolation, loop-prevention and VLAN requirements, keep the full /M suffix, then choose quantity for an ISD supply enquiry.

Hikvision · Full reference: DS-3E1310P-EI/M

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Product reference

Device class: 8 Port Fast Ethernet Smart PoE Switch

Ports and PoE

Port layout: 8 × 10/100 Mbps PoE ports plus 2 separate Gigabit RJ45 ports as listed. The Gigabit connections are copper RJ45, not SFP; the eight PoE ports are not Gigabit ports.
PoE standards: IEEE 802.3af and IEEE 802.3at as listed. Check powered-device compatibility and load; IEEE 802.3bt or passive PoE is not established by this reference.
PoE port power: Ports 1 to 8: maximum 30 W per port as listed. This does not mean all ports can supply 30 W simultaneously; the shared output budget also applies.
Total PoE budget: 60 W total PoE output budget as listed. This is separate from input power and maximum switch consumption; compare the combined connected-device load.

Switching and control

MAC address table: 4 K as listed for the MAC address table, not a concurrent-user limit.
Internal cache: 2 Mbits as listed. Retain the bit unit; no conversion to megabytes is assumed.
Port isolation: Ports 1 to 8 support port-isolation mode. Ports in an isolation group cannot communicate with each other, but can communicate with ports outside that group. Confirm the intended network configuration; isolation is not a complete security policy.
PoE watchdog: Ports 1 to 8: automatic detection and restart of cameras that do not respond, as documented. Confirm camera compatibility and settings; a restart may interrupt the camera and does not guarantee recovery or recording continuity.
Loop prevention: IEEE 802.1D STP and IEEE 802.1w RSTP are documented for preventing switching-network loops; loop prevention is disabled by default. Configure and verify the intended topology before relying on this function.
VLAN reference: IEEE 802.1Q; configurable VLAN IDs from 1 to 4094, maximum 4094 VLANs, with Trunk and Access port modes, as listed. Confirm firmware and the required network configuration; VLAN-ID range and supported VLAN count are separate limits.

Management reference

Hik-Partner Pro management: Hik-Partner Pro one-click activation and remote management are documented: port rate, bandwidth-use, PoE-use, topology and alarm displays; port/device restart, long-range-mode enablement and remote device upgrade. Confirm firmware, platform availability, network reachability and account permissions. An available setting does not establish a guaranteed distance or a configured integration.
System maintenance: Web management; DHCP client enabled by default; Super IP direct access; Hik-Central Pro and Hik-Partner Pro management; cable detection, IEEE 802.1ab LLDP discovery and port mirroring are documented. Confirm exact firmware, secure management-network configuration and access permissions before use.

Power and fitting

Housing: Metal material as listed. Confirm ventilation and site suitability; an outdoor or ingress-protection rating is not established here.
Weight reference: Net: 0.54 kg (1.19 lb); gross: 1.08 kg (2.38 lb), separately listed. Confirm the actual unit and package; gross weight is not installed-device weight.
Dimensions: W × H × D: 217.6 × 27.6 × 108.5 mm (8.57 × 1.09 × 4.27 in) as listed and consistent with the body axes in the dimension drawing. Confirm actual fitting and clearance; mounting-hole details are not included in this body-size reference.
Power input: 54 V DC, 1.2 A as listed. Confirm the correct adapter and package; this input rating is separate from total PoE output.
Maximum consumption: 65 W maximum power consumption as listed, not the PoE output budget.
Mounting reference: Desk-mounted or wall-mounted as listed. Confirm mounting parts and clearances; accessory inclusion is not assumed.

Environment

Operating temperature: 0 °C to 40 °C (32 °F to 104 °F) as listed. Confirm the powered load, ventilation and actual operating environment.
Storage temperature: -40 °C to 85 °C (-40 °F to 185 °F) as listed. Storage limits are not operating limits.
Humidity: Operating Humidity and the separate Relative Humidity row each list 5% to 95%, no condensation. This is not weatherproofing.
Surge reference: 6 kV as listed for surge protection. Confirm the protection requirements of the complete installation; this is not a no-damage or lightning-protection guarantee.

Selection notes

This reference concerns DS-3E1310P-EI/M only. Confirm the exact supplied hardware, firmware, platform requirements and intended system with ISD; a different suffix or version is not interchangeable.
ISD supplies products only. Confirm supply, stock, price, ETA, package contents and local warranty separately. Selecting enquiry quantity does not create an order, payment or stock reservation.
Check the total powered-device load as well as each port limit. Remote management requires compatible software, firmware, network access and appropriate account permissions.
Keep the full DS-3E1310P-EI/M label. The separately labelled DS-3E1310P-EI/M(B) is not selected automatically; confirm the exact unit and adapter before quoting.
For VLAN, loop prevention and camera restart requirements, include the intended topology, camera models and management platform. Extended-distance suitability needs a separate cable, speed and powered-load check.

Official documents

Manufacturer source checked 2026-10-18. The supplied unit and local terms require confirmation.