DS-3E1326P-EI

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Product reference

Device class

Smart Managed 24-Port 100 Mbps PoE Switch

Ports and switching

Port layout

24 × 100 Mbps PoE RJ45 ports plus 2 Gigabit combo uplinks as listed and labelled G1/G2 in the physical-interface drawing. These are not four independent extra uplink ports. Confirm the required media, compatible modules and combo-port use; module inclusion is not assumed.

Port interface

RJ45 ports, full duplex and MDI/MDI-X adaptive operation as described. Confirm the intended connected equipment and cable.

Network standards

IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab, plus IEEE 802.3z as listed. These network standards are separate from PoE power standards.

Forwarding method

Store-and-forward switching as listed. Confirm the intended traffic and connected equipment.

Working modes

Standard mode (default) and Extend mode are listed. Confirm the applicable cable, camera, speed and powered-load limits before using Extend mode; a mode name is not an installed-distance guarantee.

MAC address table

16 K as listed, not a camera-channel or concurrent-user limit.

Switching capacity

8.8 Gbps switching capacity as listed, not an individual port speed or Internet-service speed.

Packet forwarding rate

6.5472 Mpps as listed. Retain the source precision; actual traffic performance depends on the intended system.

Internal cache

4 Mbits as listed. Retain the bit unit; no conversion to megabytes is assumed.

High-priority ports

Ports 1 to 8 are listed as high-priority ports. Confirm the intended traffic; priority forwarding is not a guaranteed bandwidth, latency or delivery allocation.

Link aggregation

G1 and G2 port static link aggregation is listed. Confirm compatible settings at both ends and the required combo media; automatic negotiation or additional groups are not assumed.

PoE and power

PoE standards

Ports 1 to 24: IEEE 802.3af and IEEE 802.3at as listed. Confirm powered-device compatibility and load; this reference does not establish IEEE 802.3bt or passive PoE.

PoE port power

Ports 1 to 24: maximum 30 W per port as listed. These maxima are not available on all ports simultaneously; the shared output budget also applies.

Total PoE budget

370 W total PoE output budget as listed. Compare the combined powered-device load; this is separate from input power and switch consumption.

Power input

100 to 240 V AC, 50/60 Hz, maximum 6.5 A as listed. Confirm the local supply, correct power cord and package; the input rating is not the PoE output budget.

Maximum consumption

400 W maximum power consumption as listed. The separate Power source row lists the same wattage; neither row is the PoE output budget.

Management reference

Device maintenance

Remote upgrade, default-parameter recovery, log viewing and basic network-parameter configuration are documented. Confirm firmware, software, reachability and account permissions before use.

Topology display

Topology display is described. Confirm the compatible client platform, firmware and network visibility; a display function is not an automatic service or connectivity guarantee.

Port configuration

Port rate, flow control and switch configuration are listed. Confirm the settings on the exact firmware and client platform; no additional configuration function is inferred.

Device status alarms

Device status, PoE_MAX and PoE status alarms are listed. Confirm the compatible client, firmware, account permissions and alarm configuration; no delivery or monitoring-service promise is implied.

Client management

Client management is listed. Confirm the applicable client software, firmware, network access and permissions; a specific platform or current connection is not established here.

Port statistics

Real-time transmitting/receiving rate statistics and 7-day transmitting/receiving peak-rate statistics are described. Confirm client and firmware requirements; peak-rate history is not a continuous traffic-recording guarantee.

Software monitoring

The cover describes network topology management, network health monitoring, real-time alarm push, and video control and preview. Confirm compatible client software, firmware, network access and camera support; these descriptions are not an active monitoring service or an NVR channel specification.

Fitting and environment

Housing

Metal material and fan-free design as listed. Confirm ventilation and fitting; an outdoor or ingress-protection rating is not established here.

Net weight

2.83 kg (6.24 lb) net as listed. This is not gross shipping weight; confirm the actual unit and supplied package.

Operating temperature

-10 °C to 55 °C (14 °F to 131 °F) as listed. Confirm the powered load, ventilation and actual operating environment.

Storage temperature

-40 °C to 85 °C (-40 °F to 185 °F) as listed. Storage limits are not operating limits.

Humidity

Operating humidity and storage humidity each list 5% to 95%, no condensation. The two conditions are separate; this is not weatherproofing.

Selection notes

• This reference concerns DS-3E1326P-EI only. Confirm exact supplied hardware, firmware, management software and intended system; another suffix or version is not interchangeable.
• ISD supplies products only. Confirm supply, stock, price, ETA, package contents and local warranty separately. Choosing quantity adds an enquiry, not an order, payment or stock reservation.
• Provide the device models, individual power requirements and combined PoE demand. Check port speeds, individual output limits and the shared PoE budget before selecting quantity.
• Management features require applicable firmware, compatible software, network reachability and account permissions. For extended-distance links, confirm cable, camera, speed and powered-load conditions before ordering.

Official documents

• Hikvision DS-3E1326P-EI official datasheet

Manufacturer source checked 2026-10-18. The supplied unit and local terms require confirmation.