DS-3E1506P-EI

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Product reference

Device class

4 Port L2 Gigabit Smart PoE Switch

Ports and switching

Port layout

4 × Gigabit PoE ports plus 2 separate Gigabit RJ45 ports as listed. The six connections are copper RJ45; no SFP or combo uplink is established by this source.

MAC address table

2 K as listed, not a camera-channel or concurrent-user limit.

Switching capacity

14 Gbps switching capacity as printed. This is not an individual port speed or Internet-service speed; confirm performance requirements for the intended system.

Packet forwarding rate

10.42 Mpps as printed. Retain the source precision; actual performance depends on the intended traffic and connected equipment.

Internal cache

1 Mbits as listed. Retain the bit unit; no conversion to megabytes is assumed.

PoE and power

PoE standards

IEEE 802.3af and IEEE 802.3at as listed. Confirm powered-device requirements and load; IEEE 802.3bt or passive PoE is not established.

PoE port power

Ports 1 to 4: maximum 30 W per port as listed. These maxima are not available on all ports simultaneously; the shared output budget also applies.

Total PoE budget

60 W total PoE output budget as listed. Compare the combined powered-device demand; this is separate from the power-input rating and switch consumption.

Power input

54 V DC, 1.2 A as listed. Confirm the correct adapter and supplied package; the input rating is separate from PoE output.

Maximum consumption

65 W maximum power consumption as listed, not the total PoE output budget.

Idle consumption

1.6 W idle power consumption as listed, not the maximum connected-device demand.

Switching and control

Port isolation

Ports 1 to 4 support port-isolation mode. Ports in an isolation group cannot communicate with each other, but can communicate with ports outside the group. Confirm the intended network settings; isolation alone is not a complete security policy.

PoE watchdog

Ports 1 to 4: automatic detection and restart of cameras that do not respond, as described. Confirm camera compatibility and settings; a restart can interrupt service and does not guarantee recovery or continuous recording.

Link aggregation

Static link aggregation with 2 aggregation groups is documented for combining physical ports into a logical port for load balancing, bandwidth expansion and port protection. Configure compatible settings at both ends; the group count does not specify ports per group or automatic negotiation.

Loop prevention

IEEE 802.1D STP and IEEE 802.1w RSTP are documented for preventing switching-network loops; loop prevention is disabled by default. Configure and test the intended topology before relying on it.

VLAN reference

IEEE 802.1Q; configurable VLAN IDs from 1 to 4094; maximum 32 VLANs; Trunk and Access port modes, as listed. The ID range and supported VLAN count are separate limits. Confirm the actual configuration and firmware.

Management reference

Hik-Partner Pro management

Hik-Partner Pro one-click activation and remote management are documented: port-rate, bandwidth-use, PoE-use, topology and alarm displays; port/device restart, long-range-mode enablement and remote device upgrade. Confirm firmware, platform availability, network reachability and account permissions. Enabling a mode does not establish an installed-distance guarantee.

System maintenance

Web management; DHCP client enabled by default; Super IP direct access; Hik-Central Pro and Hik-Partner Pro management; cable open-circuit, short-circuit and length detection; IEEE 802.1ab LLDP; SNMP v1/v2c third-party management-platform access; and port mirroring are documented. Confirm firmware, compatible platforms, secure management-network configuration and access permissions. A protocol listing is not a secure-configuration guarantee or an active connection.

Fitting and environment

Housing

Metal material as listed. Confirm ventilation and site suitability; an outdoor or ingress-protection rating is not established here.

Weight reference

Net: 0.27 kg (0.6 lb); gross: 0.77 kg (1.7 lb), separately listed. Confirm the actual unit and package; gross weight is not installed-device weight.

Dimensions

W × H × D: 121.1 × 27.6 × 83.1 mm (4.77 × 1.09 × 3.27 in) as listed and consistent with the body axes in the dimension drawing. Confirm fitting and clearance; separate mounting-hole measurements are not included in this body-size reference.

Operating temperature

0 °C to 40 °C (32 °F to 104 °F) as listed. Confirm powered load, ventilation and the actual operating environment.

Storage temperature

-40 °C to 85 °C (-40 °F to 185 °F) as listed. Storage limits are not operating limits.

Humidity

Operating Humidity and the separate Relative Humidity row each list 5% to 95%, no condensation. This is not weatherproofing.

Mounting reference

Desk mounting or wall mounting as listed. Confirm mounting parts and clearances; accessory inclusion is not assumed.

Surge reference

6 kV surge protection as listed. Confirm the protection requirements of the complete installation; this is not a no-damage or site lightning-protection guarantee.

Selection notes

• This reference concerns DS-3E1506P-EI only. Confirm exact supplied hardware, firmware, management software and intended system; another suffix or version is not interchangeable.
• ISD supplies products only. Confirm supply, stock, price, ETA, package contents and local warranty separately. Choosing quantity adds an enquiry, not an order, payment or stock reservation.
• Provide the device models, individual power requirements and combined PoE demand. Check port speeds, individual output limits and the shared PoE budget before selecting quantity.
• Management features require applicable firmware, compatible software, network reachability and account permissions. For extended-distance links, confirm cable, camera, speed and powered-load conditions before ordering.

Official documents

• Hikvision DS-3E1506P-EI official datasheet

Manufacturer source checked 2026-10-18. The supplied unit and local terms require confirmation.