Home / Products / Hikvision

DS-3E1510P-SI

The Hikvision DS-3E1510P-SI is documented as a smart-managed 8-port Gigabit PoE switch with two separate Gigabit SFP fibre ports. Compare the connected-device load against the documented total PoE budget, check the input power and management requirements, then keep the full model and choose quantity for an ISD supply enquiry.

Hikvision · Full reference: DS-3E1510P-SI

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Product reference

Device class: Smart Managed 8-Port Gigabit PoE Switch

Ports and PoE

Port layout: 8 Gigabit PoE RJ45 ports numbered 1 to 8, plus 2 Gigabit SFP fibre-optical ports numbered 9 and 10 as documented. These are separate labelled interfaces; no additional copper or combo ports are inferred. Optical modules are not assumed included.
Copper port reference: RJ45, full duplex and MDI/MDI-X adaptive as listed in the Port Type row. Confirm cable and link requirements; this row does not specify an optical-module type.
Ethernet standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab and IEEE 802.3z as listed. Confirm the actual interface and connected equipment.
PoE standards: IEEE 802.3af and IEEE 802.3at as listed for the PoE ports. Confirm powered-device compatibility and load; no IEEE 802.3bt or higher-power sibling capability is inferred.
PoE port power: Ports 1 to 8: maximum 30 W per port as listed. This does not mean all ports can supply 30 W simultaneously; the total PoE budget and load conditions also apply.
Total PoE budget: 110 W as listed for total PoE output. This is not the input-power rating or a sum of every port maximum. Confirm the complete device load and operating conditions.
PoE control: PoE watchdog on ports 1 to 8 is documented to detect and restart cameras that do not respond; PoE enabling is supported. Confirm configuration and device behaviour; a restart may interrupt service and is not a fault-prevention guarantee.

Switching and performance

Forwarding method: Store-and-forward switching as listed. Actual application throughput depends on the network and configuration.
Operating modes: Standard mode (default) and Extend mode are listed. Confirm the required mode and its operating conditions; this entry does not establish an extended-distance speed.
MAC address table: 8 K as listed. This is a MAC-table reference, not a concurrent-customer or user limit.
Switching capacity: 20 Gbps as listed in the manufacturer table. Keep this separate from packet-forwarding rate and Internet service speed.
Packet forwarding rate: 14.88 Mpps manufacturer-listed packet-forwarding rate. Confirm the throughput required for the intended network; this is separate from switching capacity and Internet service speed.
Internal cache: 4.1 Mbits as listed. The source uses bits, not megabytes.

Management and traffic

Maintenance functions: Remote upgrade, default-parameter recovery, log viewing, basic network-parameter configuration, configuration import/export and time synchronisation are listed. Confirm firmware and supported management tools; this does not approve any upgrade or current patch level.
Port configuration: Port-rate configuration, flow control and port enabling as listed. Confirm the required settings for the connected equipment.
Port rate limiting: Ingress and egress port rate limiting as listed. No rate granularity or traffic guarantee is inferred.
Storm control: Unknown-unicast, multicast and broadcast storm control as listed. Configure and test against the actual network.
Port mirroring: Port mirroring is listed as supported. Confirm the available session and port configuration; no session count is inferred.
Link aggregation: Static link aggregation is listed. This is not evidence of LACP support or universal aggregation interoperability.
Port isolation: Ports in an isolation group cannot communicate with each other, as documented. Confirm the configured group and intended access paths.
QoS reference: WRR and SP scheduling and port priority as listed. Confirm configuration; no application-service guarantee is inferred.
VLAN reference: 4094 VLANs as listed. This is the document VLAN entry, not a number of users or an assumption about the site VLAN configuration.
Spanning tree: STP and RSTP protocols as listed. Confirm the actual topology and supported configuration; no MSTP feature is inferred.
SNMP reference: SNMPv1 and SNMPv2c are listed for obtaining system and interface node information. This historical entry is not a current security approval or a recommendation for Internet exposure; confirm secure site management and firmware.
LLDP reference: LLDP is listed for port configuration, global configuration and neighbor discovery. Confirm the management platform and network settings.
Topology and monitoring: Network topology management, alarm push and network-health monitoring are listed. Confirm the supported Hikvision software platform, firmware, permissions and any licence requirements; no cloud service or message delivery is assumed enabled.

Construction and environment

Housing material: Metal material as listed. No outdoor or ingress-protection rating is established by the housing entry.
Weight reference: Net weight: 1.21 kg (2.67 lb); gross weight: 1.3 kg (2.87 lb) as separately listed. Confirm the exact supplied unit and actual package; net and gross weight are not interchangeable.
Storage temperature: -40 °C to 85 °C (-40 °F to 185 °F) as listed. Storage limits are not operating limits.
Humidity: Operating humidity and the separately labelled Relative Humidity entry both list 5% to 95%, no condensation. Confirm site conditions; no weatherproof rating is inferred.

Power and protection

Power input: 48 V DC, 2.5 A as listed. Confirm the correct power arrangement for the supplied unit; this input entry is not the total PoE output budget or an adapter-inclusion promise.
Maximum consumption: 120 W as listed for maximum power consumption. This is not a PoE output budget; retain the separate input and output figures when checking the design.
Idle consumption: 7 W as listed for power consumption in idle. This is not PoE power available to connected devices or a full-load figure.
Surge reference: 6 kV surge protection for PoE ports is stated on the cover. This does not establish the same rating for every interface, a site lightning-protection design or a no-damage guarantee.
Physical indicator reference: The interface drawing labels PWR, PoE-MAX, LINK/ACT and PoE indicators, with separate LINK/ACT labels for optical ports 9 and 10. Confirm indicator meanings in the supplied-unit instructions; no threshold or alarm behaviour is inferred.

Selection notes

This reference concerns DS-3E1510P-SI only. Confirm the exact supplied hardware, firmware, powered devices, optics, cabling, configuration and package with ISD; EI, /M, V2 and other SI port-count variants are not interchangeable.
ISD supplies products only. Confirm stock, price, ETA, adapter or power lead, optical modules, actual package and local warranty. An enquiry is not an order, payment or stock reservation.
Each port limit, total PoE output budget, input rating, maximum consumption and idle consumption are different figures. Check the complete connected load and operating conditions before selection.
Confirm management-platform, firmware, licence and network settings before use. Historical management protocols are not a current security assessment or advice to expose the switch to the Internet.
Extended-distance operation needs the exact supported speed, cable, load and mode confirmed. No distance-performance guarantee is made here. Application drawings do not establish universal compatibility or included cameras, intercoms, gateways, optics or software.

Official documents

Hikvision DS-3E1510P-SI official datasheet

Manufacturer source checked 2026-10-18. The supplied unit and local terms require confirmation.