DS-3E1518P-EI/M

The Hikvision DS-3E1518P-EI/M is a Gigabit smart PoE switch reference. Review the documented VLAN, loop-prevention and management functions, then provide the required connections, device power demand and exact supplied-label details for an ISD supply enquiry.

Hikvision · Full reference: DS-3E1518P-EI/M

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Ports and switching

MAC address table
8 K as listed, not a camera-channel or concurrent-user limit.
Switching capacity
56 Gbps switching capacity as printed in both documents. This is not an individual port speed or Internet-service speed; no calculation from port count is used.
Packet forwarding rate
41.66 Mpps as printed in both documents. Preserve the printed value; actual traffic performance depends on the intended system.
Internal cache
4.1 Mbits as listed. Preserve the bit unit; no conversion to megabytes is assumed.

PoE and power

PoE standards
IEEE 802.3af and IEEE 802.3at as listed. Confirm the exact supplied powered-port configuration, device requirements and load; IEEE 802.3bt or passive PoE is not established.
Maximum PoE port power
30 W maximum port power as listed in the separate rating cell. Confirm the actual powered-port mapping and shared output budget before selection; simultaneous maximum loads are not promised.
Power input
100 to 240 V AC, 50/60 Hz, maximum 2.5 A as listed. Confirm the local supply and correct cord; this input rating is not the PoE output budget.
Maximum consumption
150 W maximum power consumption as listed, separate from the shared PoE output budget. Confirm the actual supplied configuration and connected-device load.
Idle consumption
20 W idle power consumption as listed, not the maximum connected-device demand.

Switching and control

Link aggregation
Static link aggregation with 8 aggregation groups is documented for combining physical ports into a logical port for load balancing, bandwidth expansion and port protection. Configure compatible settings at both ends; the group count does not specify ports per group or automatic negotiation.
Loop prevention
IEEE 802.1D STP and IEEE 802.1w RSTP are documented for preventing switching-network loops; loop prevention is disabled by default. Configure and test the intended topology before relying on it.
VLAN reference
IEEE 802.1Q; configurable VLAN IDs from 1 to 4094; maximum 32 VLANs; Trunk and Access port modes, as listed. The ID range and supported VLAN count are separate limits. Confirm configuration and firmware.

Fitting and environment

Housing
Metal material as listed. Confirm ventilation and site suitability; no outdoor or ingress-protection rating is established.
Weight reference
Net: 2.7 kg (5.9 lb); gross: 2.9 kg (6.4 lb), separately listed. Confirm the actual unit and package; gross weight is not installed-device weight.
Storage temperature
-40 °C to 85 °C (-40 °F to 185 °F) as listed. Storage limits are not operating limits.
Humidity
Operating Humidity and the separate Relative Humidity row each list 5% to 95%, no condensation. This is not weatherproofing.
Mounting reference
Rack mounting is described. Confirm the actual mounting ears, fittings, clearances and ISD package before ordering; accessory inclusion is not assumed.
Surge reference
6 kV surge protection as listed. Confirm complete-system protection; this is not a site lightning-protection or no-damage guarantee.

Management reference

Hik-Partner Pro management
Hik-Partner Pro one-click activation and remote management are documented: port-rate, bandwidth-use, PoE-use, topology and alarm displays; port/device restart, long-range-mode enablement and remote device upgrade. Confirm firmware, platform availability, network reachability and permissions. Enabling a mode does not establish an installed-distance guarantee.
System maintenance
Web management; DHCP client enabled by default; Super IP direct access; Hik-Partner Pro remote management; cable open-circuit, short-circuit and length detection; IEEE 802.1ab LLDP; and port mirroring are documented. Confirm firmware, compatible platforms, secure management-network settings and permissions; this is not an active connection or secure-configuration guarantee.

Selection notes

  • This reference concerns DS-3E1518P-EI/M only. Confirm exact supplied hardware, firmware, management software and intended system; another suffix or revision is not interchangeable.
  • ISD supplies products only. Confirm supply, stock, price, ETA, package contents and local warranty separately. Choosing quantity adds an enquiry, not an order, payment or stock reservation.
  • Provide the powered-device models, individual loads, required port speeds and total PoE demand. Confirm the exact supplied port configuration and power budget before ordering.
  • Management functions require applicable firmware, compatible software, network reachability and account permissions. Confirm cable, camera, speed and load conditions before using any extended-distance mode.

Official documents

Manufacturer source checked 2026-10-18. The supplied unit and local terms require confirmation.

Continue browsing