DS-3E1526P-EI/M

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Device class

PoE switch

Shell

Metal material

Net weight

2.96 kg (6.52 lb)

Gross weight

3.2 kg (7.05 lb)

Storage temperature

-40 °C to 85 °C (-40 °F to 185 °F)

Operating humidity

5% to 95% (no condensation)

Relative humidity

5% to 95% (no condensation)

Power supply

100~240 V AC, 50/60 Hz, Max. 4 A

Installation mode

Rack (equipped with mounting ears)

Maximum power consumption

250 W

Idle power consumption

30 W

Surge protection

6 kV

Ports

24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port

MAC address table

8 K

Switching capacity

56 Gbps

Packet forwarding rate

41.66 Mpps

Internal cache

4.1 Mbits

PoE standard

IEEE 802.3af,IEEE 802.3at

PoE power pins

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

PoE ports

PoE: Ports 1 to 24

Maximum port power

30 W; per-port ceiling subject to the shared PoE budget.

PoE power budget

230 W; shared across all powered ports, not a per-port budget.

Long range

Ports 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition.

PoE watchdog

Ports 1 to 24: auto detect and restart the cameras that do not respond.

Loop prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.

Fiber module interface

Port 26: Gigabit SFP fiber optical port, used with an optical module; confirm the module separately.

Port isolation

Ports 1 to 24: isolated group members cannot communicate with each other, but can communicate with ports outside the isolation group.

Static aggregation

Static link aggregation; support 8 aggregation groups.

Hik-Partner Pro management reference

Port rate, bandwidth utilization, PoE usage, topology and alarm status; port/device restart, long-range mode activation and remote device upgrade.

System maintenance reference

Web management; DHCP Client enabled by default; Super IP 10.180.190.200; Hik-Partner Pro remote management; cable open/short/length detection, 802.1ab LLDP and port mirroring.

Selection notes

• Figures refer only to the cited manufacturer edition for DS-3E1526P-EI/M. Confirm the actual supplied configuration and firmware.
• Manufacturer details do not confirm ISD stock, price, delivery date, local warranty or actual supplied accessories.
• The 30 W port ceiling and 230 W shared PoE budget are separate limits; all ports cannot be assumed to deliver their individual maximum simultaneously.
• Long-range mode depends on camera model and cable condition; speed at 300 m is not specified in the cited source. Confirm the actual link before purchase.
• Port 26 uses an optical module; confirm the exact module and supplied accessories separately.
• Management features describe manufacturer software capabilities, not an activated ISD integration. Confirm Hik-Partner Pro availability, configuration and firmware.
• Rack mounting and surge declarations do not establish site clearances, outdoor protection or installation approval.

Official documents

• Hikvision DS-3E1526P-EI/M manufacturer datasheet

Manufacturer source checked 2026-10-19. The supplied unit and local terms require confirmation.