DS-3E1526P-SI-24P2F
Hikvision DS-3E1526P-SI-24P2F provides 24 Gigabit PoE ports with a shared 370 W PoE budget and 56 Gbps manufacturer-listed switching capacity. Supports web management, VLAN configuration and PoE watchdog.
Hikvision · Full reference: DS-3E1526P-SI-24P2F
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
General
- Shell
- Metal material
- Net Weight
- 2.81 kg
- Gross Weight
- 3.73 kg
- Dimensions (W × H × D)
- 440.0 mm × 44.0 mm × 220.8 mm (17.32'' × 1.73'' × 8.69'')
- Operating Temperature
- 0 °C to 45 °C
- Storage Temperature
- -40 °C to 85 °C
- Operating Humidity
- 5% to 95% (no condensation)
- Relative Humidity
- 5% to 95% (no condensation)
- Power Supply
- 100 to 240 V AC, 50/60 Hz, Max. 7 A
- Installation Mode
- Rack (equipped with mounting ears)
- Max. Power Consumption
- 400 W
- Power Consumption in Idle
- 20 W
- Surge Protection
- 6 kV
Network Parameters
- Ports
- 24 × Gigabit PoE port,2 × Gigabit fiber optical port
- MAC Address Table
- 8 K
- Switching Capacity
- 56 Gbps
- Packet Forwarding Rate
- 41.66 Mpps
- Internal Cache
- 4.1 Mbits
- PoE-port link rates
- 10/100/1000 Mbps
- SFP link rates
- 100/1000 Mbps
Software Function
- Long Range
- Ports 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition.
- Port Isolation
- Ports 1 to 26: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
- PoE Watchdog
- Ports 1 to 24: auto detect and restart the cameras that do not respond.
- Link Aggregation
- Static link aggregation; up to 8 groups.
- QoS
- Port-based priority; SP and WRR scheduling.
- Loop Prevention
- IEEE 802.1D STP and 802.1w RSTP; G.8032 ERPS; disabled by default.
- VLAN
- IEEE 802.1Q; VLAN IDs 1–4094; Trunk and Access modes; maximum 4094 VLANs.
- Hik-Partner Pro management
- One-click activation and remote management: port rate, bandwidth utilisation, PoE usage, topology and alarms; restart ports/devices, enable long-range mode and upgrade firmware.
- Port Rate-Limiting
- Supported; per-port bandwidth adjustment.
- Storm Control
- Rate limiting for broadcast, multicast and unknown-unicast packets.
- DHCP Snooping
- DHCP packets permitted through trusted ports; disabled by default.
- ACL
- Inbound port ACLs; IPv4 and MAC ACLs; source/destination MAC/IP address and IP protocol type matching.
- IPSG
- Port, MAC and IP binding; up to 256 security entries.
- Energy-saving mode
- Supported; user-configurable plans
- ARP anti-spoofing
- Supported
Management
- Web management
- Supported
- DHCP client
- Supported; enabled by default for management-IP assignment
- Super IP
- Fixed 10.180.190.200 for direct access
- Management platforms
- Hik-Central Pro and Hik-Partner Pro
- Cable diagnostics
- Open circuits, short circuits and network-cable length
- Discovery protocol
- IEEE 802.1ab LLDP
- Port mirroring
- Supported
- SNMP
- v1/v2c
PoE Power Supply
- PoE Standard
- IEEE 802.3af,IEEE 802.3at
- PoE Power Pin
- 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
- PoE Port
- PoE: Ports 1 to 24
- Max. Port Power
- 30 W
- PoE Power Budget
- 370 W
Approval
- Manufacturer-listed EMC
- CE-EMC; detailed test standards are listed in the dated datasheet.
- Manufacturer-listed safety approvals
- CB and CE-LVD; detailed standards are listed in the dated datasheet.
- Manufacturer-listed environmental directives
- CE-RoHS, WEEE and REACH; see the dated datasheet for identifiers.
Physical controls
- Reset button
- Restores factory defaults; hold for more than 5 seconds.
- Grounding terminal
- Supported; chassis grounding connection.
Supplied power accessories
- Power accessories
- Power cord listed as attached; confirm regional supply.
Selection notes
- The documented specifications apply to the cited manufacturer version. Confirm the supplied hardware, firmware and accessory configuration.
- Exact original model and dated manufacturer datasheet retained. Shared PoE budget and maximum per-port output are separate limits. Long-range performance depends on camera and cable conditions. Confirm supplied revision, firmware, optical modules and installation requirements.
- Readers, locks, power supplies, batteries, licences and other accessories are not assumed to be included. ISD confirms specification, compatibility, supply, price, lead time and local warranty separately.
Official documents
Manufacturer source checked 2026-09-10. The supplied unit and local terms require confirmation.
IS DistributionsEnquire