Home / Products / Hikvision

DS-3T1310P-SI/HS

DS-3T1310P-SI/HS is documented as a 8-port 10/100 Mbps managed PoE switch. The 8 PoE access ports are 10/100 Mbps; the separate RJ45 and optical uplinks are Gigabit. Check the shared PoE budget, exact power arrangement and required modules before choosing quantities.

Hikvision · Full reference: DS-3T1310P-SI/HS

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Port roles and network capacity

Device class: PoE switch
Ports: 8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
MAC address table: 16 K
Internal cache: 4 Mbits
Fiber module interface: G2: Gigabit SFP fiber optical port, used with an optical module; module is not assumed included.
Ethernet standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z, IEEE 802.3x
RJ45 port declaration: RJ45 port, full duplex, MDIMDI-X adaptive

PoE and power

Maximum power consumption: 120 W
PoE standard: IEEE 802.3af,IEEE 802.3at
Manufacturer PoE pin declaration: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE ports: PoE: Ports 1 to 8
Maximum port power: 30 W; per-port ceiling subject to the shared budget.
PoE power budget: 110 W; shared across the powered ports.
PoE watchdog: Ports 1 to 8: auto detect and restart the cameras that do not respond.
Working mode: Standard mode (default), as listed in the cited document; not an exhaustive mode or firmware-compatibility statement.

Management features

Long range: Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition.
VLAN: VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN.
Loop prevention: Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP/RSTP/ERPS
Port isolation: Ports 1 to 8: members of an isolation group cannot communicate with each other, but can communicate with ports outside the group.
QoS: Port-based priority; SP and WRR priority scheduling. Confirm service configuration; no measured end-to-end guarantee is implied.
System maintenance: Web management, DHCP Client enabled by default, Super IP 10.180.190.200, Hik-Central Pro and Hik-Partner Pro management, cable open/short/length detection, 802.1ab LLDP and port mirroring.
Hik-Partner Pro reference: Port rate, bandwidth utilization, PoE power usage, topology and alarm status; port/device restart, long-range mode activation and remote upgrade. Confirm actual firmware and platform access.
Forwarding mode: Store-and-forward switching
SNMP reference: SNMPv1 and SNMPv2c for node and interface information; confirm the required management configuration.
LLDP reference: Port configuration, global configuration and neighbour discovery
DHCP reference: Supported
Port configuration: Port rate configuration, flow control and port enabling.
Port mirroring: Supported
Static link aggregation: Static link aggregation; 1 aggregation group in the cited manufacturer document.
Storm control: Broadcast, multicast and unknown-unicast packet rate limiting; confirm configuration.
DHCP snooping: DHCP packets pass only from trusted ports when the feature is configured. Disabled by default; not proof that an installation is protected.
Port rate limiting: Port bandwidth adjustment for network congestion control; actual limits require configuration.

Environment, dimensions and accessories

Shell: Metal material
Net weight: 0.6 kg (1.3 lb)
Gross weight: 1.2 kg (2.6 lb)
Operating temperature: -30 °C to 65 °C (-22 °F to 149 °F); device declaration only, not confirmation of the complete powered assembly.
Storage temperature: -40 °C to 85 °C (-40 °F to 185 °F)
Operating humidity: 5% to 95% (no condensation)
Relative humidity: 5% to 95% (no condensation)
Installation mode: Desk-Mounted,Rail
Surge protection: 6 kV
Optional accessories: HK-SFP-1.25G-20-1550, HK-SFP-1.25G-20-1310, HK-SFP-1.25G-1310-DF-MM, HK-SFP-1.25G-20-1310-DF, DRL-48V75W1AZ, DRL-48V240W1EN, NDR-75-48, NDR-240-48; manufacturer optional list only, not confirmation of the supplied kit.
Manufacturer ingress reference: IP40, as declared on the cited cover; confirm the actual enclosure and complete installation.

Selection notes

Each capability is a reference for its cited manufacturer document for DS-3T1310P-SI/HS, not a choice between conflicting editions. Confirm the actual hardware, firmware and supplied configuration.
Per-port power ceilings and the shared PoE budget are separate limits; all ports cannot be assumed to deliver their individual maximum simultaneously. Whole-device consumption is a different rating.
Optical modules, power units and mounting accessories are not assumed included. Confirm the exact module, fibre link, power supply and supplied kit.
Manufacturer software features are not an activated ISD integration. Confirm the actual firmware, platform access and required configuration.
Manufacturer references do not establish ISD stock, price, ETA, local warranty, authorisation, image rights or installation approval.
The PoE access ports are 10/100 Mbps; the separate RJ45 and optical uplinks are Gigabit. Do not label every port as Gigabit.
Long-range performance depends on the camera model or cable condition; speed at 300 m is not specified in the cited source. Confirm the actual link before ordering.
Confirm the correct power supply and connection against the exact manufacturer manual before use. Device and power-unit operating temperature ratings must be checked separately.
Manufacturer ingress and surge declarations do not establish outdoor suitability or protection of a complete installation.

Official documents

Manufacturer source checked 2026-10-19. The supplied unit and local terms require confirmation.