DS-3WF0EC-2NT

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

General

Device Dimensions

90.8 mm × 57.87 mm × 187.87 mm (dimensions in source order)

Package Dimensions (W × H × D)

256 mm × 231 mm × 86 mm

Net Weight

0.26 kg (0.57 lb) per device

Gross Weight

0.8 kg (1.76 lb)

Packing List

Wireless Bridge × 2, Power Adapter (12 VDC, 1 A) × 2,10/100 Mbps PoE Injector × 2, Binding Tape × 4, Quick Start Guide ×1

Packing Method

Packing in pairs

Working Temperature

-30 °C to 70 °C (-22 °F to 158 °F)

Working Humidity

5% to 95% (no condensation)

Storage Temperature

-40 °C to 80 °C (-40 °F to 176 °F)

Storage Humidity

5% to 95% (no condensation)

Installation Mode

Pole Mounting

Ingress Protection

IP55

Power Consumption

1.89 W for typical (1-ch 2MP IPC), Max. 3.7 W

Wireless Parameter

Max. Transmission Rate of Air Interface

≤ 300 Mbps

Wireless Standard

IEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps)

Working Frequency Band

2400 MHz ~ 2483.5 MHz

Antenna Gain

7 dBi

Antenna Angle

(H) Beamwidth [3 dB] 65° (V) Beamwidth [3 dB] 65°

Transmitting Power

23 dBm @11n MCS0 (Note: Transmitting power may vary with local regulations.)

Receiving Sensitivity

-87±2 dBm @HT40 MCS0

Throughput Rate

PTP: ,50 Mbps/0.2 KM(HT40),30 Mbps/0.5 KM(HT40)

Hardware Parameter

Network Interface

2 × 10/100 Mbps RJ45 ports

LED Indicator

Power indicator, LAN indicator, Signal intensity indicator

Reset

Hardware resetting button

Power Supply

12–24 VDC Passive PoE

Software Function

Application Function

IFM, IPM

Channel Width

10/20/40 MHz

Channel Selection

Auto/manual selection

Network Protocol

NTP (network time synchronization), SADP (auto search for IP address), HTTPS (web management), SSH (debugging)

Security Mode

WPA2-PSK

Security Mechanism

Wireless network name hidden

Management Method

Web, iVMS-4200, HCP

Upgrade

Web, iVMS-4200, HCP

System Log

Syslog, Control center information

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Reboot device 2. Restore device 3. Display the topology information 4. Display the connection status between AP and CPEs, including signal intensity, backgroud noise, sending & receiving rate 5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power 6. Bridge alignment 7. Spectrum scanning

Approval

EMC

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)

Safety

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chemistry

CE-RoHS (2011/65/EU), WEEE (2012/19/EU), Reach (Regulation (EC) No.1907/2006)

Radio

EN 301 893, EN 300 440, EN 62311, EN 301 489-3, EN 301 489-17

Wireless Range

Maximum Wireless Distance

Up to 500 m

Selection notes

• The documented specifications apply to the cited manufacturer version. Confirm the supplied hardware, firmware and accessory configuration.
• Wireless PHY/link rate is separate from Ethernet port speed and usable throughput. Published throughput retains PTP/PTMP topology, distance, channel width and camera conditions; it is not a guaranteed site result. Radio channels and transmit power remain subject to the source-stated regional conditions. Only source-confirmed original model/configuration values are included. No omitted suffix, hardware revision, regional order code, kit component, image or price is invented.
• Readers, locks, power supplies, batteries, licences and other accessories are not assumed to be included. ISD confirms specification, compatibility, supply, price, lead time and local warranty separately.

Official documents

• Hikvision DS-3WF0EC-2NT manufacturer reference

Manufacturer source checked 2026-09-10. The supplied unit and local terms require confirmation.