DS-7732NI-M4/16P

DS-7732NI-M4/16P is a 32-channel NVR reference with 16 Fast Ethernet PoE camera ports and four internal SATA interfaces. Check the separate camera-bandwidth, high-resolution input, display and total PoE-power limits before choosing cameras, disks and quantity.

Hikvision · Full reference: DS-7732NI-M4/16P

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Video and audio

Device class
M Series 8K NVR
IP video inputs
32 channels; camera-input count is not the PoE-port or remote-connection count.
Maximum input resolution
Up to 32 MP; high-resolution channel and bandwidth restrictions apply.
High-resolution input limit
At most 8 inputs at 32 MP / 24 MP; Ultra-HD mode must be activated for these inputs.
Incoming bandwidth
320 Mbps
Outgoing bandwidth
400 Mbps; not the incoming-bandwidth limit.
HDMI 1 output
7680 × 4320 at 30 Hz; 3840 × 2160 at 60/30 Hz; 2560 × 1440 or 1920 × 1080 at 60 Hz.
HDMI 2 output
3840 × 2160 at 60/30 Hz; 2560 × 1440 or 1920 × 1080 at 60 Hz. When HDMI 1 outputs 8K, HDMI 2 is limited to 1080p.
VGA output
1920 × 1080 at 60 Hz
Video output mode
HDMI1/VGA simultaneous output; HDMI2/VGA independent output.
CVBS output
1 BNC output, 1.0 Vp-p, 75 Ω; PAL 704 × 576 or NTSC 704 × 480. This is not an analog camera input.
Audio output
1 RCA channel, linear; the printed impedance shorthand requires separate confirmation.
Two-way audio input
1 RCA channel, 2.0 Vp-p, 1 kΩ, using the audio input.
Video decoding formats
H.265+, H.265, H.264+ and H.264
Recording resolutions
32 MP, 24 MP, 12 MP, 8 MP, 6 MP, 5 MP, 4 MP, 3 MP, 1080p, UXGA, 720p, VGA, 4CIF, DCIF, 2CIF, CIF or QCIF; the high-resolution input limit still applies.
Synchronous playback
16 channels; this does not increase camera-input or high-resolution decoding capacity.
Dual-stream recording
Supported in the document; recording and decoder limits still apply.
Stream types
Video, or Video & Audio
Audio compression
G.711 μ-law, G.711 A-law, G.722, G.726, AAC and MP2L2

Network, storage and interfaces

Remote connection reference
128 remote connections; not additional IP camera inputs.
LAN interface
1 RJ45 10/100/1000 Mbps self-adaptive Ethernet interface; separate from camera PoE ports.
PoE ports
16 RJ45 10/100 Mbps self-adaptive camera interfaces; Fast Ethernet camera connections.
PoE power reference
At most 200 W total PoE power reference; not 200 W per port.
PoE standard
IEEE 802.3af/at; confirm camera and cable requirements.
Internal disk interfaces
4 SATA interfaces; HDDs require separate confirmation.
Disk capacity reference
Up to 16 TB per HDD in this document; not an included disk set or configured usable capacity.
External disk interface
1 eSATA interface; external equipment and configuration require confirmation.
Serial interfaces
2 half-duplex RS-485 interfaces and 1 RS-232 interface
Alarm I/O reference
16 inputs / 9 outputs; output count is not a relay load rating.
USB interfaces
Front: 1 × USB 2.0; Rear: 1 × USB 3.0
Ctrl 12V output
12 V DC, 1 A; triggered through alarm output 9, not an independently assumed relay power rating.
DC 12V output
12 V DC, 1 A reference; not a combined 2 A budget with the controlled output.

Power, environment and chassis

AC power input
100–240 V AC, 50–60 Hz; check supplied plug and electrical requirements.
Consumption excluding HDD and PoE
At most 15 W, without HDD and with PoE off.
Working temperature
−10–55 °C
Working humidity
10–90%
Chassis reference
19-inch rack-mounted chassis, 1.5U; mounting hardware and installed clearances require confirmation.
Weight excluding HDD
At most 5 kg, excluding HDD; not shipping or populated-system weight.

Camera and integration selection

Camera-event and POS references
VCA events, camera features and POS information overlay are listed. Confirm the exact camera/POS devices, firmware and event configuration.
IP-speaker reference
Up to 8 IP speaker channels in this document; exact speakers, protocols, firmware and concurrent operation require confirmation.

Selection notes

  • DS-7732NI-M4/16P exact full-model reference only; confirm the actual supplied label, firmware and document applicability.
  • Input count, incoming/outgoing bandwidth, decoding, synchronous playback and display modes are separate limits; do not assume all maxima operate together.
  • PoE figures are total output references, not per-port guarantees or populated-system consumption; check the complete camera load, cabling and power budget.
  • The controlled 12 V output is triggered through alarm output 9; verify exact wiring and loads. No combined DC-output current budget or relay contact rating is established.
  • Consumption and weight exclude HDDs; the consumption figure also requires PoE off. These values are not a fully populated operating system or shipping weight.
  • Camera-event, POS and integration functions depend on the exact compatible devices, firmware and configuration; no recorder-native AI, interoperability or included licence is assumed.
  • Decoder modes, where stated, are separate and not summed; 40 decoded 1080p streams do not create 40 IP camera inputs.
  • No disk compatibility, package contents, installed clearance, local stock, price, delivery or warranty has been confirmed.

Official documents

Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.

Continue browsing