DS-7608NI-Q1/8P(E)
Hikvision DS-7608NI-Q1/8P(E) is an 8-channel Q Series NVR with eight PoE ports, a 75 W total PoE budget and 80 Mbps incoming bandwidth. One SATA interface supports up to 8 TB. Motion Detection 2.0 supports four channels; decoding capacity depends on the AI and 4K settings.
Hikvision · Full reference: DS-7608NI-Q1/8P(E)
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Motion Detection 2.0
- Human/Vehicle Analysis
- 4-ch
Video and Audio
- IP Video Input
- 8-ch
- Incoming Bandwidth
- 80 Mbps
- Outgoing Bandwidth
- 80 Mbps
- HDMI Output
- 1-ch, 4K (4096 × 2160)/30Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/30Hz, 1920 × 1080p/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz
- VGA Output
- 1-ch, 1920 × 1080p/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1280×720 /60Hz
- Video Output Mode
- HDMI/VGA simultaneous output
- Audio Output
- 1-ch, RCA (Linear, 1 KΩ)
- Two-Way Audio
- 1-ch, RCA (2.0 Vp-p, 1 k Ω)
Recording
- Stream Type
- Video, Video & Audio
- Audio Compression
- G.711ulaw/G.711alaw/G.722/G.726
Decoding
- Decoding Format
- H.265+,H.265,H.264+,H.264
- Recording Resolution
- 8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA /720p/VGA/4CIF/DCIF/ 2CIF/CIF/QCIF
- Synchronous Playback
- 8-ch
- Decoding Capability
- AI&4K Off: 8-ch@1080p(30fps) AI/4K On: 6-ch@1080p(30fps) *: The length or width of camera resolution (each track) cannot exceed 4096 pixels.
Network
- Remote Connection
- 32
- Network Protocol
- TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS
- Network Interface
- 1, RJ-45 10/100 Mbps self-adaptive Ethernet interface
PoE
- PoE Interface
- 8, RJ-45 10/100 Mbps self-adaptive Ethernet interfaces
- PoE Power Budget
- ≤ 75W
- PoE Standard
- IEEE 802.3 af/at
Auxiliary Interface
- SATA
- 1 SATA interface
- HDD Capacity per Drive
- Up to 8TB capacity for each disk
- USB Interface
- 2 × USB 2.0
- Alarm In/Out
- N/A; 4 inputs / 1 output only on the optional /Alarm4+1 model
- Optional Alarm Model
- 4 alarm inputs and 1 alarm output require the /Alarm4+1 model.
General
- Power Supply
- 48 VDC
- Consumption
- ≤ 10 W (without enabling PoE)
- Working Temperature
- -10 to +55º C (+14 to +131º F)
- Working Humidity
- 10 to 90 %
- Dimension (W × D × H)
- 263× 223 × 48 mm (10.34" × 8.76" × 1.9")
- Weight
- ≤ 1.5 kg (3.3 lb)
Certification
- CE
- 55032/55035/61000-3-2/61000-3-3/50130-4
Selection notes
- The documented specifications apply to the cited manufacturer version. Confirm the supplied hardware, firmware and accessory configuration.
- The exact (E) model is named on the cover, physical-interface diagram and manufacturer Product.model. Available Model lists STD/NEU commercial options and a separate /Alarm4+1 option; optional alarm hardware is not treated as standard. Only the exact original model and cited manufacturer datasheet edition are used. No B/C/D/E, PoE, alarm or VPro suffix is inferred from a neighbouring model.
- Readers, locks, power supplies, batteries, licences and other accessories are not assumed to be included. ISD confirms specification, compatibility, supply, price, lead time and local warranty separately.
Official documents
Manufacturer source checked 2026-09-10. The supplied unit and local terms require confirmation.
IS DistributionsEnquire