DS-7608NXI-K1/8P
Hikvision DS-7608NXI-K1/8P is an 8-channel AcuSense NVR with eight PoE ports, a 75 W total PoE budget and 80 Mbps incoming bandwidth. One SATA interface supports up to 10 TB. Facial recognition and Motion Detection 2.0 are mutually exclusive, and decoding capacity depends on whether AI is enabled.
Hikvision · Full reference: DS-7608NXI-K1/8P
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Facial Recognition
- Facial Detection and Analytics
- Face picture comparison, human face capture, face picture search
- Face Picture Library
- Up to 16 face picture libraries, with up to 20,000 face pictures in total (each picture ≤ 4 MB, total capacity ≤ 1 GB)
- Facial Detection and Analytics Performance
- 1-ch human face capture
- Face Picture Comparison
- 4-ch face picture comparison alarm
Motion Detection 2.0
- Human/Vehicle Analysis
- 8-ch
Video and Audio
- IP Video Input
- 8-ch
- Incoming Bandwidth
- 80 Mbps
- Outgoing Bandwidth
- 80 Mbps
- HDMI Output
- 1-ch, 4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz, 1024 × 768/60 Hz
- VGA Output
- 1-ch, 1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz
- Video Output Mode
- HDMI/VGA independent output
- CVBS Output
- N/A
- Audio Output
- 1-ch, RCA (Linear, 1 KΩ)
- Two-Way Audio
- 1-ch, RCA (2.0 Vp-p, 1 KΩ, using the audio input)
Decoding
- Decoding Format
- H.265/H.265+/H.264+/H.264
- Recording Resolution
- 12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
- Synchronous Playback
- 8-ch
- Decoding Capability
- AI on: 1-ch@12 MP (30 fps)/1-ch@8 MP (30 fps)/3-ch@4 MP (30 fps)/6-ch@1080p (30 fps) AI off: 1-ch@12 MP (30 fps)/2-ch@8 MP (30 fps)/4-ch@4 MP (30 fps)/8-ch@1080p (30 fps)
- Stream Type
- Video, Video & Audio
- Audio Compression
- G.711ulaw/G.711alaw/G.722/G.726/AAC
Network
- Remote Connection
- 128
- Network Protocol
- TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS
- Network Interface
- 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
PoE
- PoE Interface
- 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface
- PoE Power Budget
- ≤ 75 W
- PoE Standard
- IEEE 802.3af/at
Auxiliary Interface
- SATA
- 1 SATA interface
- HDD Capacity per Drive
- Up to 10 TB capacity for each HDD
- USB Interface
- Front panel: 1 × USB 2.0; Rear panel: 1 × USB 2.0
- Alarm In/Out
- N/A; 4 inputs / 1 output only on the optional /Alarm4+1 model
- Optional Alarm Model
- 4 alarm inputs and 1 alarm output require the /Alarm4+1 model.
General
- Power Supply
- 48 VDC, 1.875 A
- Consumption
- ≤ 10 W (without HDD, and PoE off)
- Working Temperature
- -10 °C to 55 °C (14 °F to 131 °F)
- Working Humidity
- 10% to 90%
- Dimension (W × D × H)
- 320 mm × 240 mm × 48 mm (12.6"× 9.4" × 1.9")
- Weight
- ≤ 1 kg (without HDD, 2.2 lb.)
Certification
- FCC
- Part 15 Subpart B, ANSI C63.4-2014
- CE
- EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: 2017
Intelligent Analytics
- AI Function Concurrency
- Facial recognition and motion detection 2.0 cannot be enabled at the same time.
Selection notes
- The documented specifications apply to the cited manufacturer version. Confirm the supplied hardware, firmware and accessory configuration.
- Only the exact original model and cited manufacturer datasheet edition are used. No B/C/D/E, PoE, alarm or VPro suffix is inferred from a neighbouring model.
- Readers, locks, power supplies, batteries, licences and other accessories are not assumed to be included. ISD confirms specification, compatibility, supply, price, lead time and local warranty separately.
Official documents
Manufacturer source checked 2026-09-10. The supplied unit and local terms require confirmation.
IS DistributionsEnquire