DS-7608NXI-K2/8P
The Hikvision DS-7608NXI-K2/8P is an 8-ch PoE 1U K Series AcuSense 4K NVR. It lists 8 IP camera inputs, 80 Mbps incoming bandwidth and 2 SATA interfaces. Facial recognition, motion detection 2.0 and perimeter protection cannot be enabled at the same time. Confirm the exact model and camera requirements, then select quantity for an ISD supply-only enquiry.
Hikvision · Full reference: DS-7608NXI-K2/8P
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Recording and display
- Device class
- 8-ch PoE 1U K Series AcuSense 4K NVR
- IP camera inputs
- 8 channels; not the decoding-stream count
- Incoming bandwidth
- 80 Mbps
- Outgoing bandwidth
- 160 Mbps
- HDMI output
- 1 HDMI output: 3840 × 2160 at 30 Hz; 2560 × 1440 at 60 Hz; 1920 × 1080, 1600 × 1200, 1280 × 1024, 1280 × 720 or 1024 × 768 at 60 Hz
- VGA output
- 1 VGA output: 1920 × 1080, 1280 × 1024 or 1280 × 720 at 60 Hz
- Display output mode
- HDMI and VGA independent output
- Video formats
- H.265 / H.265+ / H.264 / H.264+
- Recording resolutions
- 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p / UXGA / 720p / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
- Synchronous playback
- 8 channels
- Decoding with AI on
- AI on: 1 × 12 MP / 2 × 8 MP / 4 × 4 MP / 8 × 1080p; each listed alternative at 30 fps, not simultaneous totals
- Decoding with AI off
- AI off: 2 × 12 MP / 3 × 8 MP / 6 × 4 MP / 12 × 1080p; each listed alternative at 30 fps, not camera-input expansion
Analytics and configuration
- Recorder-side analytics
- Facial recognition / perimeter protection / motion detection 2.0; verify selected function and stream limits
- Camera-side analytics
- Compatible-camera functions: facial recognition / perimeter protection / motion detection 2.0 / ANPR / throwing objects from building / VCA; not all onboard NVR analytics
- Perimeter analysis by recorder
- 2 channels at 4 MP with HD network cameras using H.264/H.265; human/vehicle analysis; AI-exclusion note applies
- Perimeter analysis by camera
- All channels with compatible camera-side analytics enabled; confirm exact cameras and configuration
- Face functions
- Face picture comparison / human face capture / face picture search; selected function limits apply
- Face analysis capacity
- 1 channel at 8 MP; AI-exclusion note applies
- Face picture comparison
- 4 channels; not the face-video analytics channel count
- Face library limits
- Up to 16 libraries and 20,000 face pictures in total; each picture ≤ 4 MB; total capacity ≤ 1 GB
- Motion detection 2.0 by recorder
- All channels at 4 MP; up to 8 MP only when enhanced SVC mode is enabled; human/vehicle analysis
- Motion detection 2.0 by camera
- All channels with compatible camera-side detection enabled; verify exact camera and setup
- AI concurrency limitation
- Facial recognition, motion detection 2.0 or perimeter protection cannot be enabled at the same time.
Network and audio
- Stream types
- Video / video and audio; depends on the actual input stream
- Audio compression
- G.711ulaw / G.711alaw / G.722 / G.726 / AAC
- Remote connections
- 128 as listed; actual streams and bandwidth must remain within applicable limits
- Integration references
- ONVIF profiles S/G / SDK / ISAPI; verify the exact camera and firmware, not universal interoperability
- LAN interface
- 1 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface; separate from camera PoE ports
- Network protocol references
- TCP/IP / DHCP / IPv4 / IPv6 / DNS / DDNS / NTP / RTSP / SADP / SMTP / SNMP / NFS / iSCSI / ISUP / UPnP / HTTP / HTTPS; listing is not an enabled-by-default or security guarantee
PoE, storage and power
- PoE interfaces
- 8 RJ-45 ports at 10/100 Mbps; distinct from the Gigabit LAN interface
- Total PoE budget
- ≤ 80 W shared across PoE ports; not 80 W per port or recorder input consumption
- PoE standards
- IEEE 802.3af/at; confirm camera load and cabling
- SATA interfaces
- 2 SATA interfaces; hard disks not assumed included
- Capacity per HDD
- Up to 10 TB per HDD; not a guaranteed total usable capacity
- USB interfaces
- Front: 1 × USB 2.0; rear: 1 × USB 2.0
- Alarm inputs and outputs
- 4 inputs / 1 output; confirm actual wiring and selected hardware
- Recorder DC input
- 48 V DC, 2.5 A as listed; not the PoE output budget
- Recorder consumption reference
- ≤ 15 W without HDD and with PoE off; not total loaded camera-system demand
- Operating temperature
- -10 to 55 °C (14 to 131 °F)
- Operating humidity
- 10% to 90%; condensation suitability not established in the cited row
- Recorder weight reference
- ≤ 3 kg without HDD (6.6 lb as listed)
- Rack-mount ear reference
- Optional rack-mounting ears shown; confirm exact accessory and clearance, not assumed supplied
Selection notes
- Confirm the complete DS-7608NXI-K2/8P model, supplied hardware, camera compatibility and selected firmware before quoting.
- ISD confirms supply, stock, price, lead time, hard disks, power accessories, package contents and local warranty separately.
- Camera inputs, decoding streams, synchronous playback and analytics channels are different limits; do not use a decoding figure as the camera-input count.
- Camera-side analytics require a compatible camera, its enabled functions and matching configuration. Listing ONVIF profiles is not universal camera compatibility.
- PoE power is a shared port budget, not per-port output or recorder input consumption. Confirm every camera load, cable and power configuration.
- Disk limits are per HDD; usable storage and recording days depend on supported drives, configuration, codecs, scene and bitrate. No total usable capacity or retention promise is inferred.
- Facial recognition, motion detection 2.0 or perimeter protection cannot be enabled at the same time.
Official documents
Manufacturer source checked 2026-10-18. The supplied unit and local terms require confirmation.
IS DistributionsEnquire