DS-2AE5232T-A
The DS-2AE5232T-A is a 2 MP TurboHD analog PTZ reference with 32x optical zoom and a 4.8–153 mm lens. It lists selectable TVI, AHD, CVI or CVBS video output, RS-485 and UTC control, with a 24 V AC power reference. Match the camera signal standard and control settings to the recorder; do not substitute an IP or IR-equipped suffix.
Hikvision · Full reference: DS-2AE5232T-A
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Imaging, lens and illumination
- Device class
- 2 MP 32x analog PTZ speed dome
- Image sensor
- 1/2.8-inch progressive-scan CMOS optical format; not a measured sensor diagonal.
- Maximum image resolution
- 1920 × 1080 pixels, manufacturer 2 MP class. This does not assign that resolution to every stream or output mode.
- Shutter-time range
- 1 s to 1/10,000 s. Exposure affects motion and low-light results.
- Day and night filter
- An IR cut filter is listed. This alone is not proof of an IR illuminator, illumination range or a permanent-colour mode.
- Optical zoom and lens
- 32x optical zoom with a 4.8–153 mm lens. Optical zoom is separate from digital enlargement.
- Digital zoom
- 16x digital zoom. It does not multiply the optical-zoom specification into a new optical rating.
- Aperture range
- F1.2–F4.4. Lens aperture changes with zoom; do not assume a constant aperture over the full range.
- Focus modes
- Auto, semi-auto and manual focus are listed.
- Optical zoom time
- Approximately 5.6 s from optical wide to tele; not a guaranteed field response time.
- Horizontal field of view
- Horizontal 54.2°–1.97°, wide to tele. No vertical or diagonal field of view is inferred.
- Minimum working distance
- 10–1500 mm, wide to tele, is listed as the minimum-working-distance reference. It is not a target-identification distance.
- Dynamic range
- At least 120 dB WDR is listed in the table, with True WDR wording on the cover. This is not a backlit-scene recognition guarantee.
- Image enhancement
- BLC, HLC, 3D DNR, electronic image stabilisation and regional focus are listed.
- Privacy masks
- Eight programmable privacy masks are listed. Confirm actual masking and PTZ operation.
PTZ movement and controls
- Pan movement
- 360° endless pan is listed. Confirm mounting and cable arrangements.
- Tilt movement
- Tilt -5° to +90°, with auto-flip listed.
- Pan speeds
- Manual pan 0.1–250°/s; preset pan 250°/s.
- Tilt speeds
- Manual tilt 0.1–150°/s; preset tilt 150°/s.
- Preset positions
- 256 preset positions are listed. Do not transfer a different dome model count.
- Proportional zoom reference
- Rotation speed can adjust with zoom magnification. This is not automatic target tracking.
- Power-off memory
- Power-off memory is listed. It does not provide uninterrupted operation during an outage.
- Patrol reference
- 10 patrols, with up to 32 presets per patrol.
- Pattern reference
- Five patterns, with a total recording time no less than 10 minutes. The stated duration is total, not 10 minutes per pattern.
- Park and scheduled actions
- Preset, patrol, pattern and pan/tilt/panorama scans are among the listed park actions. Scheduled actions also list day/night modes and zero calibration; confirm the actual control setup.
- Preset freezing
- Preset freezing is listed; confirm display and recorder behaviour.
Streams, storage and connections
- Video frame-rate reference
- The camera table lists 30 fps at 1920 × 1080 in this US document. Do not assign that rate to every selectable output standard or a PAL configuration.
- Switchable video output
- TVI, AHD, CVI or CVBS video output is selectable over BNC; the cited row specifies NTSC. Not four simultaneous outputs or identical resolutions in every mode.
- RS-485 control
- Half-duplex RS-485 with self-adaptive Hikvision, Pelco-P and Pelco-D protocols. Confirm address, baud rate, controller and wiring.
- UTC control
- UTC using HIKVISION-C is listed. This is coaxial control, not Ethernet or ONVIF support.
- Alarm connections
- Two alarm inputs and one alarm output are listed. Electrical contact ratings are not inferred.
Power, physical limits and selection
- Power reference
- 24 V AC, maximum 24 W. No 12 V DC or standard PoE capability is inferred.
- Operating conditions
- -30 to +65 °C, humidity at most 90%, non-condensing. Confirm the actual site and enclosure conditions.
- Protection reference
- IP66 is listed. TVS 4000 V lightning, surge and voltage-transient protection are referenced; no IK rating is inferred. These are not guarantees against every site exposure.
- Body dimensions
- Diameter 220 mm × height 326 mm, matching the table and whole drawing. The 156 mm inner dome is not the overall body width.
- Weight reference
- Approximately 3 kg (6.61 lb). No packaged shipping or assembled-mount weight is inferred.
- Mounting selection
- The source lists WMP-L, CMP, PMP, JBPW-L, ceiling/pole and parapet options as not included. Check the complete bracket and adapter assembly; not an ISD installation service.
Selection notes
- This DS-2AE5232T-A reference uses only its complete literal model and the cited regional document. Confirm supplied hardware, region, firmware, camera/recorder settings, power, mounts and package contents. Similar names or other suffixes are not interchangeable.
- Manufacturer references do not confirm stock, price, ETA, local warranty, authorisation, image rights or Malaysian compliance. ISD supplies products only.
- Confirm required output mode, power, recorder, card, cable, mounting and accessories. Regional packaging descriptions do not confirm the items ISD will supply.
- Confirm the minimum-illumination condition before low-light design; no value is assigned here. No network or IR feature is transferred from another suffix.
Official documents
Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.
IS DistributionsEnquire