DS-K1107AMK

Hikvision DS-K1107AMK is a M1 card reader with a 12-key keypad. The retained source lists 13.56 MHz card reading. The manufacturer lists RS-485, Wiegand W26/W34 and OSDP communication, 12 V DC supply and a maximum 2 W consumption. The exact-model sheet is kept separate from other generations and regional ordering codes. Confirm the existing credentials, controller, reader generation and required quantity before an ISD supply enquiry.

Hikvision · Full reference: DS-K1107AMK

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Credential and keypad selection

Device class
Card Reader
Processor reference
32-bit processor. This is not a credential capacity, door count or benchmark guarantee.
Card module and frequency
M1 card-reading module at 13.56 MHz. Confirm the exact card technology; the German sheet does not establish every ISO/card family or anti-cloning feature.
Keypad configuration
12 keys: 0-9, * and #. Confirm the actual controller authentication mode; physical keys do not alone establish standalone PIN access.

Controller interfaces and supply

Communication protocols
RS-485, Wiegand W26/W34 and OSDP are listed. Match the actual controller, firmware and configuration; OSDP alone is not an OSDP Secure Channel or universal integration approval.
Interface-count references
One RS-485, one Wiegand and one tamper interface are listed. Interface counts are not a door count or lock-relay electrical rating.
Wiegand configuration reference
The source states that Wiegand is set via DIP switch. Do not copy switch-position instructions from a different generation.
OSDP baud-rate reference
The German RS-485 row specifies OSDP at 19,200 baud. Confirm the actual edition and controller; this rate is not transferred to AEK or older non-A readers.
Supply voltage
12 V DC is listed. This is not a PoE input, a lock-power output or confirmation that an adapter is included.
Power consumption
At most 2 W is listed. This is not a relay-load rating, shared power-supply design or supplied-adapter confirmation.

Feedback and maintenance references

Audible feedback
A built-in buzzer/beeper indicates reading status. Do not treat it as a voice intercom, speaker output or guaranteed site-alarm audibility.
Tamper alarm
Tamper-alarm support is listed. Confirm the actual signalling, wiring and controller response; this is not a complete site alarm system.
Online-upgrade reference
An online-upgrade function is listed. Obtain the authorised file for the exact model and hardware; this is not a firmware download, update instruction or cross-generation compatibility promise.
Watchdog reference
A watchdog function is described for exception recovery. The statement is not a measured uptime, service-life or ISD warranty guarantee.

Physical and environmental selection

Operating temperature
-20 to 65 degrees C is listed. Check the actual location and supplied edition; this is not an installed-system approval.
Operating humidity
10-90% RH, non-condensing. No condensation or immersion approval is established.
Body dimensions
115 x 44 x 22 mm is listed. This is a body-size reference, not the carton, hole pattern or mounting clearances.
Ingress-protection reference
IP65 is listed. This is not an immersion, saltwater, corrosion or approved complete installation rating.
Mounting selection
Wall mounting with screws is listed; gang-box mounting is explicitly not supported. Confirm the actual surface and supplied fixing set.
Net weight reference
0.16 kg net. Keep it separate from gross weight and the actual supply package.
Gross weight reference
0.25 kg gross. Package contents still require confirmation; this is not the net reader weight.

Selection notes

  • Manufacturer reference applies only to the complete DS-K1107AMK identity in the retained document. Confirm the actual reader generation, controller, credentials, power and installed firmware; this is not an installed-system or supply approval.
  • A reader is not a complete access controller or powered lock. Confirm the full controller, card technology, firmware, quantity and power arrangement.
  • Keep DS-K1107 and DS-K1107A generations, E/M card variants, keypad versions and regional ordering codes distinct; do not merge IDs or reuse firmware by similar name.
  • ISD supplies products only. Stock, price, ETA, local warranty, included credentials/adapters/fixings and installation arrangements are confirmed separately.

Official documents

Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.

Continue browsing