DS-K1107EK
Hikvision DS-K1107EK is a 125 kHz EM card reader with a 12-key keypad. The manufacturer lists RS-485, Wiegand W26/W34 and OSDP communication, 12 V DC supply and a maximum 2 W consumption. The family sheet names this exact model and separates its card and keypad configuration. Confirm the existing credentials, controller, reader generation and required quantity before an ISD supply enquiry.
Hikvision · Full reference: DS-K1107EK
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Credential and keypad selection
- Device class
- Card Reader
- Processor reference
- 32-bit processor. This is not a credential capacity, door count or benchmark guarantee.
- Card module and frequency
- EM card-reading module at 125 kHz for ID card-number reading. Confirm the exact credential format; a frequency alone is not universal compatibility.
- Keypad configuration
- 12 keys: 0-9, * and #. Confirm the actual controller authentication mode; physical keys do not alone establish standalone PIN access.
Controller interfaces and supply
- Communication protocols
- RS-485, Wiegand W26/W34 and OSDP are listed. Match the actual controller, firmware and configuration; OSDP alone is not an OSDP Secure Channel or universal integration approval.
- Wiegand configuration reference
- The source states that Wiegand is set via DIP switch. Do not copy switch-position instructions from a different generation.
- Reader ID settings
- Reader ID settings are via DIP switch. This is not a statement of how many readers any controller supports.
- Supply voltage
- 12 V DC is listed. This is not a PoE input, a lock-power output or confirmation that an adapter is included.
- Power consumption
- At most 2 W is listed. This is not a relay-load rating, shared power-supply design or supplied-adapter confirmation.
Feedback and maintenance references
- Card-reading distance
- At most 50 mm is the listed reading-range reference, not a guaranteed read for every credential, mounting surface or environment.
- Audible feedback
- A built-in buzzer/beeper indicates reading status. Do not treat it as a voice intercom, speaker output or guaranteed site-alarm audibility.
- LED indicators
- Power and status indicators are listed. Actual access authorisation remains the controller function.
- Tamper alarm
- Tamper-alarm support is listed. Confirm the actual signalling, wiring and controller response; this is not a complete site alarm system.
- Online-upgrade reference
- An online-upgrade function is listed. Obtain the authorised file for the exact model and hardware; this is not a firmware download, update instruction or cross-generation compatibility promise.
- Watchdog reference
- A watchdog function is described for exception recovery. The statement is not a measured uptime, service-life or ISD warranty guarantee.
Physical and environmental selection
- Operating temperature
- -20 to 65 degrees C is listed. Check the actual location and supplied edition; this is not an installed-system approval.
- Operating humidity
- 10-90% RH, non-condensing. No condensation or immersion approval is established.
- Body dimensions
- 115 x 44 x 22 mm is listed. This is a body-size reference, not the carton, hole pattern or mounting clearances.
- Ingress-protection reference
- IP65 is listed. This is not an immersion, saltwater, corrosion or approved complete installation rating.
- Mounting selection
- Wall mounting with screws is listed; gang-box mounting is explicitly not supported. Confirm the actual surface and supplied fixing set.
Selection notes
- Manufacturer reference applies only to the complete DS-K1107EK identity in the retained document. Confirm the actual reader generation, controller, credentials, power and installed firmware; this is not an installed-system or supply approval.
- A reader is not a complete access controller or powered lock. Confirm the full controller, card technology, firmware, quantity and power arrangement.
- Keep DS-K1107 and DS-K1107A generations, E/M card variants, keypad versions and regional ordering codes distinct; do not merge IDs or reuse firmware by similar name.
- ISD supplies products only. Stock, price, ETA, local warranty, included credentials/adapters/fixings and installation arrangements are confirmed separately.
- DS-K1107E and DS-K1107EK only: the complete source card-module bullet restricts this credential reference to these listed models.
- DS-K1107EK and DS-K1107MK only: the complete source Keypad row restricts this physical keypad configuration to these listed models.
Official documents
Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.
IS DistributionsEnquire