IS DistributionsEnquireDS-K1108MK
Hikvision DS-K1108MK Mifare reader for controller-based access systems, with RS-485 and Wiegand communication and 12 VDC power.
Hikvision · Full reference: DS-K1108MK
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Power
- Power supply
- 12 VDC
- Power consumption
- ≤ 2 W
System
- Processor
- 32-bit
- Electronic clock and watchdog
- Built in
Authentication
- Card radio frequency standard
- ISO 14443-A
- Reading range
- ≤ 50 mm
- Card type
- Mifare card number
- Card reading frequency
- 13.56 MHz
Function
- ID settings
- Via DIP switch
- Tamper alarm
- Supported
- Firmware update
- Online upgrading
Interface
- Communication mode selection
- RS-485 or Wiegand, selected via DIP switch
- Communication protocols
- RS-485, Wiegand W26/W34 and OSDP
General
- Buzzer
- Supported
- LED indicators
- Power and status indicators
- Working temperature
- -20 °C to 65 °C
- Working humidity
- 10% to 90% (non-condensing)
- Dimensions
- 123 × 88 × 21 mm
- Ingress protection
- IP65
Installation
- Mounting method
- Wall mounting with or without gang box
Selection notes
- The documented specifications apply to the cited manufacturer version. Confirm the supplied hardware, firmware and accessory configuration.
- Exact original model and suffix retained. Specifications are tied to the listed manufacturer document editions; confirm supplied hardware, firmware and controller compatibility.
- Readers, locks, power supplies, batteries, licences and other accessories are not assumed to be included. ISD confirms specification, compatibility, supply, price, lead time and local warranty separately.
Official documents
Manufacturer source checked 2026-09-10. The supplied unit and local terms require confirmation.