DS-KB8113-IME1
DS-KB8113-IME1 is a wired doorbell reference with a two-megapixel camera, two-way audio and an access-control relay connection. Check the complete model label, indoor station, network and lock requirements before selecting quantity.
Hikvision · Full reference: DS-KB8113-IME1
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Camera and video
- Device class
- Vandal-resistant doorbell
- Camera
- 2 MP HD camera
- Field of view
- 88° horizontal, 45° vertical and 106° diagonal
- Video compression
- H.264
- Main-stream video
- 1080p at 30 fps or 720p at 30 fps; separate settings.
- Sub-stream resolution
- D1, 704 × 576 pixels; no sub-stream frame rate is established here.
- Wide dynamic range
- True WDR; no numerical dB rating is established.
- IR supplement reference
- Up to 3 m low-illumination IR supplement reference; scene performance depends on conditions.
- Motion detection
- Listed in the manufacturer specification.
- Anti-flicker frequencies
- 50 Hz or 60 Hz
Audio and interfaces
- Audio intercom
- Two-way audio communication
- Audio input
- Built-in omnidirectional microphone
- Audio output
- Built-in loudspeaker
- Audio compression
- G.711 U; listed audio compression rate 64 kbps.
- Audio processing
- Noise suppression and echo cancellation
- Network interface
- Wired 10/100 Mbps, self-adapting; not Gigabit or a Wi-Fi declaration.
- Relay reference
- 1 relay; count is not a lock-supply or electrical load rating.
- Alarm input
- 1
- Grounding connection
- 1 grounding reference; follow applicable wiring instructions.
- Call button
- 1
Power, environment and mounting
- Protection references
- IP65 and IK09 manufacturer ratings; review installation and exposure conditions.
- Power inputs
- IEEE 802.3af standard PoE or 12 V DC as separate supply options; do not assume simultaneous powering.
- Consumption reference
- Less than 10 W; not a lock output-power rating.
- Working temperature
- −30–50 °C
- Working humidity
- 10–90%
- Heating-module reference
- Heat-module support is listed; confirm configuration and environmental suitability.
- Mounting reference
- Surface mounting
- Dimensions (H × W × D)
- 161.85 × 74.13 × 53.2 mm; axes confirmed by the complete dimension drawing.
Selection notes
- This bare DS-KB8113-IME1 reference must match the complete supplied label/firmware; do not substitute another revision’s specifications.
- Check exact indoor station, network, power, relay load and required integrations before selection.
- Video frame rate, sub-stream resolution and illumination reach are separate limits; no inferred sub-stream FPS or guaranteed night performance.
- IP65 and IK09 are manufacturer references, not unrestricted exposure or vandal-proof guarantees.
- No complete installed kit, local stock, price, delivery, package contents or warranty is confirmed.
Official documents
Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.
IS DistributionsEnquire