IS DistributionsEnquireDS-KV6113-PE1
DS-KV6113-PE1 is a house door-station reference with a 2 MP camera, H.264 video and an IC-card reader in the cited H1 2020 catalogue. The exact PE1 column must not be replaced with WPE1 specifications. Check the indoor stations, credentials, door circuit, firmware and power arrangement before selecting quantity.
Hikvision · Full reference: DS-KV6113-PE1
Choose quantityManufacturer reference
Manufacturer details describe the cited version. Confirm the exact unit and intended system.
Product functions and interfaces
- Device class
- House Door Station
- Camera
- Low-illumination 2 MP colour CMOS camera reference.
- Video
- H.264, 1920 x 1080 at 25 fps in the cited catalogue; actual stream settings and firmware require checking.
- Audio
- Built-in omnidirectional microphone and loudspeaker; G.711U at 64 Kbps, with noise suppression and echo cancellation.
- Card-reader reference
- Built-in IC-card reader is listed; exact credentials and security policy must be checked.
- Door detection and alarms
- Door-magnetic status detection, door-magnetic alarm and tampering alarm are listed; field sensors and configuration require checking.
- Supplementary illumination
- IR supplementary illumination is listed; no numerical distance established here.
- Ethernet
- 1 RJ45 10/100 Mbps self-adaptive Ethernet interface.
- Protocol reference
- TCP/IP and RTSP are listed; exact firmware and endpoint compatibility require checking.
Power and selection references
- Door interfaces
- 4 I/O inputs and 1 I/O output are listed; no lock load or electrical output rating is inferred.
- Housing
- Plastic housing reference; no fire or impact certification inferred.
- Power input
- 12 V DC or Standard PoE as stated; the IEEE PoE subtype is not specified in this table.
- Power consumption
- Up to 12 W in the cited table; not a connected-device output budget.
- Operating temperature
- -40 to 60 °C in the cited historical reference; confirm the supplied revision and installation conditions.
- Operating humidity
- 10% to 90% in the cited table; no additional enclosure or condensation protection inferred.
- Protection reference
- IP65 in the manufacturer table; confirm the complete installation and sealing.
- Manufacturer dimensions
- 138 x 65 x 27 mm in the manufacturer L x W x H notation; allow separate cable and mounting clearances.
Selection notes
- Only the DS-KV6113-PE1 column applies. This is a historical H1 2020 UK manufacturer reference, not proof of current firmware, local suitability, supplied equipment or ISD availability.
- IC-card wording is not proof of a particular credential frequency, secure-card generation or customer access policy.
- Manufacturer references do not confirm current ISD stock, price, delivery, included equipment, local warranty or publication approval.
Official documents
Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.