Home / Products / Hikvision

DS-KV8102-IM

DS-KV8102-IM is a house door-station reference with a 1.3 MP CMOS camera, 720p video and an aluminium-alloy housing in the cited H1 2020 catalogue. Its power-over-network-cable wording names DS-KAD606-P and DS-KAD606-N; it is not evidence of generic IEEE PoE compatibility. Confirm the actual power arrangement, indoor station and firmware before selecting quantity.

Hikvision · Full reference: DS-KV8102-IM

Choose quantity

Manufacturer reference

Manufacturer details describe the cited version. Confirm the exact unit and intended system.

Product functions and interfaces

Device class: House Door Station
Camera: Low-illumination 1.3 MP colour CMOS camera reference.
Video streams: H.264 video, 1280 x 720 at 25 fps in the cited catalogue.
Audio: Built-in omnidirectional microphone and loudspeaker; G.711U at 64 Kbps, with noise suppression and echo cancellation.
Card-reader reference: Built-in IC-card reader is listed; exact credential technology and policy must be checked.
Door detection and illumination: Door-magnetic status, door-magnetic/tampering alarms and IR supplementary illumination; no IR distance established.
Ethernet interface: 1 RJ45 10/100 Mbps self-adaptive Ethernet interface.
Protocol reference: TCP/IP and RTSP; actual firmware/device interoperability must be checked.

Configuration and selection references

Serial and door interfaces: 1 half-duplex RS-485 port, 4 I/O inputs and 1 I/O output; electrical ratings and wiring remain to confirm.
Housing: Aluminium alloy in the selected IM column; not the plastic IP/VP variants.
Power arrangement: 12 V DC / 24 V DC, power over network cable with DS-KAD606-P and DS-KAD606-N named; confirm voltage, wiring and the supplied equipment before connection.
Power consumption: Up to 12 W in the cited table; not a connected-device power budget.
Operating temperature: -40 to 60 °C in the historical table; confirm the supplied revision and complete installation.
Operating humidity: 10% to 90% in the manufacturer table; do not infer additional environmental protection.
Protection reference: IP65 reference; verify the complete installed enclosure and sealing.
Manufacturer dimensions: 182 x 100 x 33 mm in manufacturer L x W x H notation; mounting and cable clearance must be checked separately.

Selection notes

Only the DS-KV8102-IM named model card or column applies. These are historical H1 2020 UK manufacturer references, not a current supplied configuration, compatibility approval or ISD commercial promise.
Keep IM, IP and VP suffixes separate. The named distributor arrangement is a historical reference, not an approval to connect an arbitrary PoE source.
Confirm the exact supplied version, connected equipment and commercial terms before ordering. No current ISD stock, price, delivery, included parts or local warranty is confirmed.

Official documents

Hikvision UK H1 2020 Video Intercom & Access Control Range - DS-KV8102-IM

Manufacturer source checked 2026-10-20. The supplied unit and local terms require confirmation.